[ausev] Torx bit for Electric Ranger bed.

[Mark Farver]

mark witt wrote:
> To Derek and All..Augh!..just got back a couple of hours ago and it's now 
> 3am Sunday morning. I do have some more info and ideas for the Ranger. I'll 
> send them out over the next couple of days..thanks...good night...Witt
>
>   
I think have the correct bit here.  The spec says a T55 should be .44" 
point to point.  The socket I have in my hand is .48.  Its probably the 
correct bit, I had to purchase it for the RangerEV project.

I think I got my T55 Torx bit for less than $10 at an Auto Parts place, 
they were commonly used on some GM brake systems in the 80's.

Mark





>   
>> From: Derek Bridges <bridges at ieee.org>
>> To: Mark Witt <aztexan45 at hotmail.com>
>> Subject: Torx bit for Electric Ranger bed.
>> Date: Fri, 11 Aug 2006 23:04:58 -0500
>>
>> Mark,
>>
>>    I hope this finds you you enjoying the cool weather in Colorado.  I was 
>> thinking about the battery project  (as apparently have several other 
>> people) and I looked for a T55 Torx bit to detach the Ranger bed. The best 
>> deal for a single bit is on Ebay. It is item number: 4635727016,  "T55 TORX 
>> INSERT BIT Heavy Duty Apps 3/8 Hex Drive". If you have not yet gotten one, 
>> I would suggest getting that one since it is only about $5 including 
>> shipping.  Maybe we can pull this stuff together by Sunday the 20th. One of 
>> the local guys even said he has an engine hoist and a long frame jack. 
>> Let's talk when you get back in town.
>>
>> Derek Bridges
>>
>>
>>     
>
>
> _______________________________________________
> AusEV mailing list
> AusEV at austinev.org
> http://www.austinev.org/mailman/listinfo/ausev
>
>