[ausev] Open Garage Saturday

[Aaron Choate]

I have the crane and would be glad to deliver it.  I may not be able to
stay, but can make sure the crane gets to you.

Cheers,

Aaron

On 4/20/07, Mark Farver <mfarver at mindbent.org> wrote:
>
> Mike Delany wrote:
> > Mark,
> > Do you need a transmission jack?  You are welcome to come by this
> evening
> > and pick it up (north central).  I doubt that I will be able to make it
> > tomorrow, but this might help.
> >
> Thanks!
>
> This time we went all the way, and pulled the upper battery racks and
> dropped the motor and transmission.  So an engine crane (chris?) should
> be all it takes to lower it in.
>
> I do need to make some adjustments to the motor hub tonight, to get it
> moved forward on the shaft a bit.  The pressure plate to still too far
> from the throwout bearing for the clutch to disengage.  We slid the hub
> forward last time I had the stack apart, but the huge amount of force
> required to disengage the racing clutch forced it back.  This time I
> will have to drill some pockets on the motor shaft to give the setscrews
> some bite.  (Or if someone has a lathe and can turn me a quick spacer
> ring, that would work too.)
>
> My house is at 11501 Circle Bend Dr, near the Lamar/Braker intersection.
>
> Mark Farver
> _______________________________________________
> AusEV mailing list
> AusEV at austinev.org
> http://www.austinev.org/mailman/listinfo/ausev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.austinev.org/pipermail/ausev/attachments/20070420/209d250e/attachment.html