[ausev] EV Calculator Script

[Mark Hastings]

.......
Where does Uve's calculator indicate these things? For example, 
according to the calculator, 1st gear @ 90mph would require my motor to 
be spinning at 13,000RPM with 383 Volts to it... both of which would 
rapidly destroy my motor. Many of the results calculated in these motor 
speed/torque/etc. tables for 1st-5th gears are either not possible or 
disastrous just like these are. But the calculator doesn't show which 
values are the achievable/safe limits for the given setup. So why show 
these numbers? Doesn't it just increase confusion and decrease 
usefulness of such a calculator? Or am I missing something?
........

There is a section on Uves calculator where it lists the max speed in each gear and whether it is RPM or voltage limited.

The further sections where it shows 1st gear at 90mph and shows speed/draw/etc are confusing but if they were somewhat accurate it would be useful. If I was to make one easy change to those 1st/2nd/3rd/4th/5th gear section where it shows speed/draw/etc at each speed it would be to put N/A in all the speeds that weren't available in that gear. 

I tried the new calculator and it showed my S-15 pickup getting 18miles. Which is a little low unless it is winter but I probably don't have all the figures properly set for the vehicle.

That was another nice feature of Uves calc where it had templates for some base vehicles. Perhaps including some links to sources where one could easily find that information would be better then templates.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com