[ausev] Motor cables

[Roy Holder]

At 10:07 AM 1/26/2007 -0600, you wrote:
>Is this a fat 2/0 cable with lugs on the end? I have some cables that
>might be just about the exact length that I'm not using, and if
>they're too long I may still have some lugs around that I can crimp
>on. I also have some copper strap which would work well too.

both ends have a bolt hole and are bolted down.

>
>Did it just break off? Was it soldered or crimped?
the 'lug' broke, really more like melted, at the joint between the flat
part that is bolted down and the round part that is on the cable.
I cant tell is it is soldered or crimped, I will have to cut of the shrink
tube or electrical tape to see later
>
>Erik
>
>On 1/25/07, Roy Holder <roy at holder3.com> wrote:
>> One if the cables under the GEO hood failed.
>> Its between the breaker and a contactor and only about 5 inches long.
>> The metal end conductor with the bolt hole separated from the rest of the
>> cable.
>>
>> Is there a local source for the double bolt thru cables?
>>
>>
>> _______________________________________________
>> AusEV mailing list
>> AusEV at austinev.org
>> http://www.austinev.org/mailman/listinfo/ausev
>>
>_______________________________________________
>AusEV mailing list
>AusEV at austinev.org
>http://www.austinev.org/mailman/listinfo/ausev
>