[ausev] Troubleshooting electrical drain issues

[Christopher Robison]

On Sun, June 24, 2007 10:23 pm, Rob Hirschfeld wrote:
> Does anyone have a suggestion on how I could track down my power loads per
> circuit.  I have an ammeter, but it only goes up to 200 millis.

I have a 25 amp 50 millivolt shunt you can borrow; you can put it in
series with any one of your loads (or all of them). I don't have the
corresponding meter, but you can just read the millivolts off a regular
voltmeter and do the math.

Let me know if you're interested; I can bring it over.  (I just checked; I
have a 50A 50mV too.)




-- 
Christopher Robison
chris at ohmbre.org
http://ohmbre.org          <-- 1999 Isuzu Hombre + Z2K + Warp13!