[ausev] HELP!

[michael]

Thanks for the help.

These pictures ARE NOT edited for size, so they might be a bit big.....

http://www.gceus.com/computer/1.jpg
http://www.gceus.com/computer/2.jpg
http://www.gceus.com/computer/3.jpg

Its 20mm deep from top to bottom.
Around 14mm accorss on the top
I believe that the sides are 10mm...

This would save the me the hassle of buying another electric scooter. 
Especially since the one I want cost around 3 grand...

Thanks!

Michael

-----Original Message-----
From: ausev-bounces at austinev.org [mailto:ausev-bounces at austinev.org] On Behalf 
Of Sarah & Erik
Sent: Thursday, October 25, 2007 5:07 PM
To: AustinEV News Announcements and General Discussion
Subject: Re: [ausev] HELP!

You could make an adapter cable with the appropriate male and female
connectors on it. Mouser.com will let you order small quantities of
connectors, send pictures and we can help you figure out what they
are.

Erik

On 10/25/07, michael <mringer at austin.rr.com> wrote:
>
>
>
> I know this isn't for a car, but it is for an electric vehicle.  I would
> post this on the electric motorcycle forum, but my questions on that list
> about building a electric scooter garnered no support, and one kind of nasty
> e-mail.
>
>
>
> So,
>
>
>
> Here's my deal.   I have an old cheap Chinese electric scooter.  I like it,
> but it has problems with the controller.  I bought a new one put the
> throttle connector on the new controller is fe-male as it is corresponding
> connector on the scooter.  DO NOT want to splice the old connector incase
> the controller doesn't work as advertised.  Anyone any ideas as to what I
> should do?
>
>
>
> Thanks!
>
>
>
> Michael
>
>
>
>
> _______________________________________________
> AusEV mailing list
> AusEV at austinev.org
> http://www.austinev.org/mailman/listinfo/ausev
>
>
_______________________________________________
AusEV mailing list
AusEV at austinev.org
http://www.austinev.org/mailman/listinfo/ausev