[ausev] controller amps

[m. edmund howse]

Tom,
Can you be more specific?
Realistically it isn't a transient if it lasts for more than a 
millisecond or so and in this case the shunt won't care
and you also probably won't  be able to measure it or need to worry 
about any transients unless you have severe voltage spikes as well. 
Surges in current or voltage of more than a few seconds can be 
devastating but this is different than a transient by most definitions.

marv




tomsmail at wtez.net wrote:

>Does anyone have direct experience with Zilla low voltage transient
>current draw on a 9" motor?  I'm wondering how much above 500 A to expect,
>with an aggressive (street, not pro drag racing or anything) driving
>cycle, and if this merits a 1KA current shunt.
>
>Regards,
>Tom
>
>
>
>_______________________________________________
>AusEV mailing list
>AusEV at austinev.org
>http://www.austinev.org/mailman/listinfo/ausev
>
>  
>